Omnideck v1.0 Advanced Learning Guide
Psychology • Decision Trees • Common Mistakes • Indicator Pairing
⏱️ Reading Time: 15 minutes
🎯 Why 10 Systems Can Hurt More Than Help
More indicators doesn't mean more profit. Most traders enable all 10 Omnideck systems on day one, suffer analysis paralysis, and quit within a week. This guide teaches you the psychology of multi-system trading, which combinations actually work, and how to avoid the mental traps that destroy complex strategies.
🚀 Your First Signal in 5 Minutes
Never used Omnideck before? Start with 3 systems ONLY.
Step 1: Enable ONLY These 3 Systems
• TD Sequential (cycle timing)
• EMAs (trend direction)
• Support/Resistance (key levels)
Disable everything else for now.
Step 2: Wait for TD Signal
Look for TD 9 Buy or TD 9 Sell. This is your trigger signal.
Step 3: Check the Other 2 Systems
• EMAs aligned with TD direction? ✅
• Price at/near Support (for buy) or Resistance (for sell)? ✅
Step 4: Simple Entry Rule
If TD 9 + EMAs aligned + at key level = Take the trade
Step 5: Set Stop
Place stop beyond the nearest support/resistance (0.5% buffer)
Example: SPY 1H Chart
- Signal: TD 9 Buy appears at $450
- EMA Check:
- Price above 50 EMA ✅
- 50 EMA above 200 EMA ✅
- Level Check: Daily support at $449.80 (right below price) ✅
- Confirmation: All 3 systems agree = Take trade
- Entry: Long at $450.20
- Stop: $449.20 (below support with buffer)
Don't enable more systems yet. Master these 3 first. After 20 trades, you can add Regime Filter + SuperTrend.
📋 The 3-2-1 Rule for Omnideck
Memorize This Framework
3 Things to ALWAYS Check:
- ✅ System Agreement: Minimum 6 out of your enabled systems must agree
- ✅ No Major Conflicts: No system screaming the opposite direction
- ✅ Higher TF Alignment: Check one timeframe higher, must confirm
2 Things to NEVER Do:
- ❌ Never enable all 10 systems at once (analysis paralysis guaranteed)
- ❌ Never change your system combo after 1 loss (need 50 trades minimum to evaluate)
1 Golden Rule:
📌 Start with 3 systems. Add 1 new system every 20 trades.
Complexity is earned, not given. Master simple combinations before adding more layers.
🧠 Psychology: Key Challenges with Multi-System Trading
Challenge 1: Analysis Paralysis from 10 Systems
What Happens: TD 9 appears, but RSI is overbought, Regime is yellow, SuperTrend is green, EMAs bullish, Stochastic diverging. You spend 30 minutes analyzing every angle. By the time you decide, the signal has expired untaken.
Why This Happens: You're trying to get perfect confirmation from all 10 systems. But perfect alignment rarely happens, and waiting for it means missing 90% of valid trades.
The Fix: Set a 10-minute analysis timer. If 6+ systems agree, take the trade. If fewer than 6 agree OR timer expires, skip it. Perfection is the enemy of execution.
Mental Script: "6+ systems aligned = take it. Timer expired or <6 alignment = skip it. No exceptions."
Challenge 2: System Switching After Every Loss
What Happens: You use TD + Regime + SuperTrend for your first trade. It loses. Next trade, you switch to TD + EMAs + Squeeze, thinking "Maybe this combination is better!" That loses too. Third trade, you try TD + BMSB + Candlestick patterns. After 10 trades, you've used 8 different combinations and have no idea what actually works.
Why This Happens: Every loss triggers doubt. With 10 systems available, there are hundreds of possible combinations. Your brain thinks switching = progress, but it's actually chaos.
The Fix: Choose your 4-6 systems BEFORE starting. Commit to that exact combination for a minimum of 50 trades. One loss doesn't mean the combination is broken—you need sample size to evaluate performance.
Mental Script: "I committed to these 6 systems for 50 trades. I'm on trade #12. One loss doesn't change my system."
Challenge 3: System Blaming After Losses
What Happens: Trade loses on TD 9 + Regime + EMAs. You think: "TD Sequential doesn't work!" Next signal: you disable TD, enable different systems. Week later: new systems lose, disable those too. Month later: you've cycled through all 10 systems, nothing "works."
Why This Happens: You're blaming individual systems instead of accepting that ALL trading systems have losing trades. No system wins 100% of the time.
The Fix: Commit to your chosen 4-6 systems for minimum 50 trades before changing. One loss doesn't invalidate a system—sample size reveals performance. Track: "After 50 trades with TD + Regime + SuperTrend + EMAs, I won 32/50 (64%)." That's data. "TD doesn't work after 3 losses" is emotion.
Mental Script: "One loss doesn't mean broken system—I need 50 trades to evaluate true performance."
🌳 Decision Tree: Should I Take This Multi-System Trade?
┌──────────────────────────────────────┐
│ OMNIDECK SIGNAL APPEARS (any system)│
└──────────┬───────────────────────────┘
│
▼
┌──────────────┐
│ How many of │
│ YOUR chosen │
│ systems agree?│
└──┬───────┬───┘
│ │
<6 6+
│ │
▼ ▼
❌ SKIP Continue
│
▼
┌──────────────┐
│ Any major │
│ conflicts? │
└──┬───────┬───┘
│ │
YES NO
│ │
▼ ▼
❌ SKIP Continue
│
▼
┌──────────────┐
│ Higher TF │
│ agrees? │
└──┬───────┬───┘
│ │
NO YES
│ │
▼ ▼
❌ SKIP Continue
│
▼
┌──────────────┐
│ 15-second │
│ explanation │
│ test pass? │
└──┬───────┬───┘
│ │
NO YES
│ │
▼ ▼
❌ SKIP ✅ TAKE
⚡ Quick Rules for Omnideck
- 6+ systems must agree: Minimum for trade consideration (out of your chosen systems)
- No major conflicts: SuperTrend vs Regime, TD exhaustion vs all momentum bullish
- 15-second test: Can you explain the setup simply in 15 seconds? If not, skip
- Higher TF check: One timeframe higher must confirm direction
✅ Your First 3 Trades - Verification Checklist
Print This and Keep it Visible While Trading
Before Every Trade, Verify:
Trade #_____ (Date: ______)
My enabled systems: ________________
- ☐ Minimum 6 systems agree (or 3/3 if using starter 3-system setup)
- ☐ No major conflicts (no system screaming opposite direction)
- ☐ Higher TF checked (confirms trade direction)
- ☐ Can explain in 15 seconds ("TD 9 + EMAs + Support = long")
- ☐ Stop placed beyond key level (0.5% buffer minimum)
- ☐ Position sized correctly (max 1% account risk)
- ☐ Analysis took <10 minutes (if longer, too complex = skip)
After Your First 3 Trades, Review:
- Did I stick to my chosen system combination? Y / N
- Which checklist item did I skip most? _______________
- Win rate so far: ___/3
- Did I spend >10 minutes analyzing any trade? Y / N
- Am I ready to add 1 more system (after 20 trades)? Y / N
System Progression Path:
Start: TD + EMAs + Support/Resistance (3 systems)
After 20 trades: Add Regime Filter (4 systems)
After 40 trades: Add SuperTrend (5 systems)
After 60 trades: Add Volume Surge (6 systems)
Never go beyond 6-7 active systems—diminishing returns kick in.
🚫 Top 5 Mistakes with Omnideck
Mistake #1: Enabling All 10 Systems on Day 1
What Happens: You install Omnideck, enable everything immediately. Chart becomes visual chaos. You don't understand what any system does because you never learned them separately. Analysis paralysis sets in. You take no trades or take random trades.
The Fix: Start with 3 systems only (TD Sequential + EMAs + Support/Resistance). Trade these for 2 weeks. Once comfortable, add 1-2 more. Maximum recommended: 6 systems simultaneously. Never use all 10 at once.
Mistake #2: Using TD Signals Without Confirming Other Systems
What Happens: TD 9 Buy appears. You enter immediately without checking: Is Regime bullish? Are EMAs aligned? Is there support nearby? Trade fails because TD alone isn't enough.
The Fix: TD signals are triggers, not complete setups. Before entering any TD signal, check: 1) Regime color, 2) EMA alignment, 3) Nearest support/resistance, 4) Volume. Need 3+ confirmations.
Mistake #3: Ignoring System Conflicts
What Happens: TD 13 Sell (exhaustion) appears, but SuperTrend is bright green (strong uptrend), Regime is green (bullish), EMAs all bullish, Squeeze just fired bullish. You see the TD signal and short anyway. Trade fails spectacularly.
The Fix: When one system contradicts 5+ others, skip the trade. Example: TD 13 Sell is valid, but if 7 other systems are screaming bullish, the trend overrules the exhaustion signal. Wait for alignment.
Mistake #4: Not Simplifying Your System Over Time
What Happens: You've been using 8 systems for 3 months. Performance is mediocre (52% win rate). You keep adding more filters, more systems, more complexity. Win rate drops to 48%.
The Fix: After 50+ trades, review which systems actually helped vs added noise. Most successful Omnideck traders eventually simplify down to 4-5 core systems. Complexity ≠ performance. More often: Simplicity = clarity = better decisions.
Mistake #5: Assuming "Perfect" Setups Can't Lose
What Happens: You find 9/10 systems aligned bullish. You think "This is guaranteed!" and risk 3% because "it's so perfect." Trade immediately reverses and stops you out. You lose 3% on a single trade.
The Fix: No setup is guaranteed. Even 10/10 systems aligned doesn't eliminate risk. Risk management rules apply to EVERY trade: 1% risk maximum, no exceptions. Perfect-looking setups can still fail—that's probability.
❓ Top 10 Questions from New Users
Quick Answers to Common Confusion
Q1: Should I enable all 10 systems to get maximum accuracy?
A: No. Start with 3 systems (TD + EMAs + S/R). More systems = more complexity, not better accuracy. Most successful traders use 4-6 systems maximum.
Q2: What if only 5 systems agree instead of 6?
A: Skip it. The 6-system minimum (out of your enabled systems) is there to filter weak setups. Lowering standards = more losses.
Q3: TD 9 appeared but EMAs are against it. Do I trade?
A: No. TD signals are triggers, not complete setups. You need confirmation from your other enabled systems. One signal alone = skip.
Q4: How long should I wait before adding a new system?
A: Minimum 20 trades with your current combination. Need to understand how each system behaves before adding complexity.
Q5: What's a "major conflict" that should make me skip?
A: Examples: TD 13 Sell (exhaustion) but all 6 other systems screaming bullish. SuperTrend red but Regime + EMAs + Squeeze all green. One system vs 5+ others = conflict.
Q6: Can I use Omnideck on 1-minute charts?
A: Yes, but expect more noise. 1H-4H charts work best for Omnideck because systems have time to align properly. On 1M, signals appear/disappear too quickly.
Q7: I've been using 5 systems for 50 trades. Win rate is 48%. Should I add more systems?
A: No. Adding systems won't fix 48% win rate. Review your 50 trades: Did you follow the checklist? Higher TF alignment? Proper stops? Fix process before adding complexity.
Q8: What's the best combination of systems?
A: Depends on trading style, but most successful combinations include: TD Sequential (timing) + Regime/EMAs (trend) + Support/Resistance (levels) + SuperTrend (confirmation). That's 4 systems covering different angles.
Q9: All 10 systems aligned bullish. Should I risk more than 1%?
A: Never. Even perfect alignment doesn't eliminate risk. 1% max per trade, no exceptions. Perfect setups can still lose.
Q10: How do I know which systems are actually helping vs adding noise?
A: After 50+ trades, review: For each system, check how often trades won when it agreed vs disagreed. If a system's agreement doesn't correlate with wins, it's noise—disable it.
📄 Printable Quick Reference Cheat Sheet
┌────────────────────────────────────────────────────────────────┐
│ OMNIDECK QUICK REFERENCE │
│ (Save or Print This) │
├────────────────────────────────────────────────────────────────┤
│ │
│ 📊 SYSTEM PROGRESSION PATH: │
│ Start: TD + EMAs + S/R (3 systems) │
│ Trade 20: Add Regime Filter (4 systems) │
│ Trade 40: Add SuperTrend (5 systems) │
│ Trade 60: Add Volume Surge (6 systems) │
│ → Never go beyond 6-7 systems │
│ │
│ ✅ GOOD SETUP REQUIREMENTS: │
│ • 6+ systems agree (or all if using 3-system starter) │
│ • No major conflicts (no system screaming opposite) │
│ • Higher TF aligned (check one TF up) │
│ • Can explain in 15 sec ("TD 9 + EMAs + Support") │
│ • Analysis took <10 minutes (if longer, too complex) │
│ │
│ ❌ SKIP IF: │
│ • Fewer than 6 systems agree │
│ • Major conflict (1 system vs 5+ others) │
│ • Higher TF fights the signal │
│ • Need >10 minutes to analyze │
│ • Can't explain simply in 15 seconds │
│ │
│ 🧮 THE AGREEMENT MATH: │
│ 3 systems enabled: Need 3/3 agreement (100%) │
│ 4 systems enabled: Need 3/4 agreement (75%) │
│ 5 systems enabled: Need 4/5 agreement (80%) │
│ 6+ systems enabled: Need 6+ agreement (~85%+) │
│ │
│ 🎯 POSITION SIZING: │
│ • Max 1% risk per trade (even with 10/10 alignment) │
│ • Max 3 Omnideck positions open at once │
│ • Perfect setups can still lose (probability, not magic) │
│ │
│ ⏱️ ANALYSIS TIME LIMIT: │
│ • Set 10-minute timer when signal appears │
│ • 6+ agree + timer hasn't expired = Take it │
│ • <6 agree OR timer expires = Skip it │
│ • No exceptions (prevents overthinking) │
│ │
│ 🎓 THE 3-2-1 RULE: │
│ 3 Always Check: Agreement, No conflicts, Higher TF │
│ 2 Never Do: Enable all 10, Change combo after 1 loss │
│ 1 Golden Rule: Add 1 system every 20 trades │
│ │
│ 🔄 SYSTEM ROTATION (Don't Do This): │
│ ❌ Trade 1: TD + EMAs + Regime │
│ ❌ Trade 2: TD + SuperTrend + S/R (switched after loss) │
│ ❌ Trade 3: TD + Squeeze + Volume (switched again) │
│ → This is chaos, not strategy. Pick one combo for 50 min │
│ │
└────────────────────────────────────────────────────────────────┘
Keep this visible on your second monitor while trading!
🎓 Your Learning Journey - Success Milestones
You're Progressing When You See These Signs
📅 Week 1: Recognition Phase (3-System Setup)
- ✅ You can quickly spot when TD 9/13 appears
- ✅ You check EMAs and S/R automatically (no reminder needed)
- ✅ You're comfortable skipping signals when all 3 don't align
- ✅ You can explain setups in under 15 seconds
- ✅ You haven't enabled any additional systems yet (discipline)
📅 Week 2-4: Execution Phase (4-5 Systems)
- ✅ You've completed 20+ trades with 3-system setup
- ✅ You've added Regime Filter and understand how it changes signals
- ✅ Analysis time consistently under 10 minutes
- ✅ You're comfortable with "6+ systems agree" rule
- ✅ You haven't changed your system combo after losses (sticking to plan)
📅 Month 2+: Mastery Phase (6 Systems)
- ✅ Win rate stabilizing around 55-65%
- ✅ You've settled on your "core 6" systems and stopped adding
- ✅ You can spot major conflicts instantly (1 system vs 5 others)
- ✅ You're combining Omnideck with external indicators (Janus, Volume Oracle)
- ✅ You trust your system more than individual signals
🚨 Warning Signs (You Need to Review the Guide):
- ❌ You enabled 7+ systems within first month
- ❌ You're changing system combos every 5-10 trades
- ❌ Analysis time regularly exceeds 15 minutes
- ❌ You're trading signals with fewer than 6 systems agreeing
- ❌ Win rate below 45% after 50+ trades with same combination
Remember: Omnideck's power comes from combining multiple perspectives, but only if you master simplicity first. 3 systems you understand beats 10 systems that confuse you. Complexity is earned through experience, not enabled on day one.
🔗 Works Well With Other Signal Pilot Indicators
High Synergy Pairs
- + Janus Atlas: Omnideck multi-system signals + Janus level clusters = precise entries at key support/resistance zones
- + Volume Oracle: Omnideck alignment + Volume Flow confirmation = institutional participation validation
- + Pentarch: Omnideck TD system + Pentarch deep TD analysis = enhanced cycle timing with multiple confirmation layers
Common Combinations
- Omnideck TD 9 + Regime green + Janus support cluster → Multi-layer bullish reversal at key level
- Omnideck squeeze breakout + Volume Oracle Flow → Volatility expansion with institutional confirmation
- Omnideck 7+ systems aligned + Pentarch IGN → Extreme conviction setup with institutional signal
Why These Pair Well
Omnideck provides comprehensive multi-system analysis in one place. Janus adds precise entry levels. Volume Oracle confirms institutional participation. Pentarch adds deeper TD Sequential analysis. Use Omnideck for initial filtering and confirmation, then refine entries with complementary indicators.
Ready to apply what you've learned?
← Back to Omnideck Documentation